R12S Hanging Rotators

 

The R12S is a continuous rotation rotator where the oil to open and close the grapple is run through the rotator to the outlets on the axle. The rotator has a grease fitting for hookup pin of the hanger. The hose guard protects the hoses from damage.

•The rotator comes with JIC fittings for the incoming oil. The oil hoses between the grapple and the rotator can be hooked up either from the bottom of the rotator, or from the sides of the rotator.

 

Technical Specs

Rotation
Unlimited in Either Direction
Max Load
26,400 lbs
Max Working Pressure
4640 psi
Torque
1900 ft lb/2900 psi
Weight
138 lbs
Pin Size
1 3/8"
 
 

Technical Specs

A) Width of Block
3.956" (101 mm)
B) Upper Pinhole
1.75" (45 mm)
C) Axle Diameter
6.8" (173 mm)
D) Lower Pinhole
n/a
E) Height
15.827" (402 mm)
Thread
JIC 3/4" 16
Distance between Bolts
6.811" (173 mm)
Bold Diameter
3/8" (16 mm)