RX120FFT Rigid Rotator


The RX120FFT is a continuous rotation rotator where the oil to open and close the grapple is run through the rotator to the outlets on the axle. The rotator has a grease fitting for hookup pin of the hanger. The hose guard protects the hoses from damage.

  • One can use either 12mm or 16mm high grade metric bolts or a combination of the two for the hook-up on the top.

  • The rotator has JIC ports. The center ports are for rotation, and the outer ports open and close the bucket or grapple.

  • The bottom is hooked up with either 5/8" or 16mm high grade bolts. The hoses can be hooked up running straight down, or to the side.

  • The rotator also comes with ports to run the hoses to the side.

Technical Specs

Unlimited in Either Direction
Max Load
11,000 lbs
Max Working Pressure
3625 psi
1475 ft lb
141 lbs
Recommended Oil Flow