RX390 Rigid Rotator


The RX390 is a continuous rotation rotator where the oil to open and close the grapple is run through the rotator to the outlets on the axle. The rotator has a grease fitting for hookup pin of the hanger. The hose guard protects the hoses from damage.

  • The rotator has JIC ports. The center ports are for rotation, and the outer ports open and close the bucket or grapple. .

  • The rotator also comes with ports to run the hoses to the side.

Technical Specs

Unlimited in Either Direction
Max Load
30,000 lbs
Max Working Pressure
4350 psi
1770 ft lb
320 lbs
Recommended Oil Flow