SG52HD Stone Grapple

 

This grapple has a two prong jaw on one side, and a single jaw on the other. The jaws and the wear plates are made out of Hardox steel.

The form of the jaws is such that the grab also penetrates into piles of brush or tires.

• Modern bypass grapple design.

• All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.

• The Valby grapples have large, powerful cylinders with heavy pistons.

• Double connection rods provide good balance and less stress.

• A belly plate protects the cylinder from underneath.

• All Valby grapples have easily accessible grease fitting.

• The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems enabling controlled release of loads.. The grapples also close to a tight minimum opening.

 

 

Technical Specs

Max Openings
52"
Min Openings
3 1/2"
Max Lifting Capacity
2860 lbs
Height Open
25"
Height Closed
20"
Width of Wider Claw
14"
Working Pressure
2900 psi
Jaw Material
Hardox
Weight
265 lbs
Recommended Rotator