TG20DG Demolition Grapple

 

Demolition Grapple for use on excavators from 6 to 10 tons.

• The Valby GT20DG is a pinch type demolition grab with replaceable wear plates on the jaws.

• The mounting plate is built to take the strain of operating in horizontal positions with a rigid rotator.

• Two connection rods provide a balanced load to the jaws.

• All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.

• The Valby grapples have large, powerful cylinders with heavy pistons.

• A belly plate protects the cylinder from underneath.

• All Valby grapples have easily accessible grease fittings.

• The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems enabling controlled release of loads.

 

Technical Specs

Max Openings
62"
Min Openings
---
Max Lifting Capacity
5500 lbs
Height Open
28 1/2"
Height Closed
35"
Width of Wider Claw
21"
Working Pressure
5076 psi
Jaw Material
Hardox
Weight
1089 lbs
Recommended Rotator
RX3-30