TG35DG Demolition Grapple

 

Demolition Grapple for use on excavators from 25 to 32 tons.

• The Valby GT35DG is a pinch type demolition grab with replaceable wear plates on the jaws.

• The mounting plate is built to take the strain of operating in horizontal positions with a rigid rotator.

• Two connection rods provide a balanced load to the jaws.

• All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.

• The Valby grapples have large, powerful cylinders with heavy pistons.

• A belly plate protects the cylinder from underneath.

• All Valby grapples have easily accessible grease fittings.

• The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems enabling controlled release of loads.

 

Technical Specs

Max Openings
92"
Min Openings
---
Max Lifting Capacity
15,400 lbs
Height Open
40 1/2"
Height Closed
51"
Width of Wider Claw
39 1/4"
Working Pressure
5076 psi
Jaw Material
Hardox
Weight
3730 lbs
Recommended Rotator
---