GR100 Log Grapple


The Valby GR100 is a grapple for handling of large stems.

• Modern bypass grapple design.

• All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.

• The grapple has a flat mounting plate for the rotator which is over one inch thick.

• Large, powerful cylinder.

• Double connection rods provide good balance and less stress.

• A belly plate protects the cylinder from underneath.

• All Valby grapples have easily accessible grease fittings.

• The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems. The grapples also close to a tight minimum opening.


Technical Specs

Max Openings
Min Openings
5 7/8"
Max Lifting Capacity
15,400 lbs
Height Open
Height Closed
31 1/2"
Width of Wider Claw
Working Pressure
3625 psi
Jaw Material
1050 lbs
Recommended Rotator